Make sure the machine is plugged in and the power button is turned on. The first place to check is always your power supply. Sometimes you do not have to if your repair is minor. Then if you have your owner’s manual look inside it to find the location of other screws if you need to take more parts off. Once that is done you can remove the front panel. Now before you remove the front panel, you need to remove the stitch selector first. Next is the base plate and there is one lone screw that needs to come out. Remove both screws and lift the panel off. Then go to the front panel and there is a screw at the rear and one hiding under the reverse lever. To remove the cover of the 150 E you need to remove the screw on the back panel first. ![]() Removing the covers on different Husqvarna sewing machines may not be done in the same fashion. How to Take Apart a Husqvarna Sewing Machine The machine will not sew- make sure the machine is plugged in, check foot control connection, model 20 put bobbin winder in left positions, model 30 put bobbin winder to the right position. Thread cutter not working- remove the bobbin and clean area, make sure the thread cutter is turned on. Skipped stitches- check for a broken needle, change to the proper needle for fabric, re-thread top and bobbin threads, turn the machine off to reset, change to correct presser foot, make sure needle is inserted properly and in the right direction. Needle in the wrong way- remove the needle and reinsert it the right way.īobbin thread breaks- wind a new bobbin, replace the stitch plate, replace the bobbin.įabric not feeding- make sure the feed dogs are in the up position, increase stitch length. ![]() Needle breaks or is bent- replace the needle. Here are a few of those common problems you have to fix on your own: There are a lot of common problems you will face when you own a Husqvarna sewing machine.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |